5100mz-Plus Vibratome
Model 5100mz-Plus
The 5100-Plus is perfect for those who need to keep slices viable for longer e.g. for electrophysiological field recordings. The user can calibrate the Z-axis deflection of the blade to 2 µm with the adjustable blade holder and “Opti-cal” Calibration device.
The 5100-Plus is perfect for those who need to keep slices viable for longer e.g. for electrophysiological field recordings. The user can calibrate the Z-axis deflection of the blade to 2 µm with the adjustable blade holder and “Opti-cal” Calibration device. Minimal Z-axis deflection reduces the “chatter” and minimises damage to the slice surface, leading to greater viability of the cells on the slice surface.
The New 5100mz series Vibrating Microtome shares the User interface with the premium 7000smz-2, placing a wide range of adjustable parameters at the user’s fingertips:
- Vibration frequency from 50 to 80 Hz
- Adjustable amplitude from 0.5mm to 1.5mm
- Fine control of the blade advance (min. 0.1 mm/sec)
- Set start and stop position of blade travel
- Control box on umbilical cord ideal for operation in an isolated environment
Use in fully manual or the semi-automated "Slice window" mode which automatically remembers the start and finish position of the slice.
Features
- Includes the Z-axis calibration unit (5100mz-Plus only)
- Vibration frequency from 50 to 80 Hz
- Adjustable amplitude from 0.5mm to 1.5mm
- Fine control of the blade advance (min. 0.1 mm/sec)
- Set start and finish position of blade travel
- Remote controls allowing for sterile use in culture hood
- Ice water bath easily removed for cleaning
- Optional cold light and magnifier for clear observation
- Optional Peltier cooled bath
- Download Brochure
- Download Full Bibliography
Specifications
- Section thickness step size: 0.001 mm
- Bath table rise & fall speed: 1.0 mm/sec maximum
- Maximum (vertical) travel of bath table: 19 mm
- Cutting head advance speed:
- Minimum: -2.0 mm/sec (-1.00 during slicing)
- Maximum: +2.0 mm/sec (+1.00 during slicing)
- Cutting head retraction speed: 2.0 mm/sec
- Maximum travel of cutting head: 40 mm
- Blade oscillation frequency
- Minimum: 50 Hz
- Maximum: 80 Hz (amplitude dependent)
- Frequency step size: 5 Hz
- Blade oscillation amplitude
- Minimum: 0.5 mm (nominal)
- Maximum: 1.5 mm (nominal)
- Amplitude step size: 0.5 mm (nominal)
- Power requirements (Selectable): 115VAC 60Hz, 230VAC 50Hz
- Power rating: 100W
- Fuse rating
- 115V: T2A 250VAC
- 230V: T2A 250VAC
- Light source: Powered from 5100mz
- Dimensions: 350mm Width x 450mm Depth x 350mm Height (excluding magnifier/light source)
- Weight: 15kg (excluding magnifier)
-250.jpg)
-250.jpg)
-250.jpg)
-1-250.jpg)
-1-250.jpg)
-250.jpg)
